![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
When it comes to bathroom decoration, it might seem simple at first glance, but in reality, it's a complex process that requires careful attention. Once the renovation is done, the work isn’t over — the inspection phase is just as important as the construction itself.
Wall Tiles
Start by examining the wall surface for any noticeable bumps or dips. Check if the joints are straight and evenly spaced. Then, run your hand over the tiles to ensure they’re smooth and free of cracks. Finally, tap the tiles with a screwdriver handle, especially around the corners, to listen for any hollow sounds that may indicate poor adhesion.
Bathtub and Sink
Fill the bathtub and sink up to the overflow level and leave it overnight. If the water level drops, there could be a leak. Next, check if the overflow pipe drains properly when you release the water. After that, drain all the water and inspect the drain to make sure it’s not clogged. Lastly, check for any standing water in the bathtub after use.
Flooring
Pour some water on the floor and observe whether it flows toward the drain. If it doesn’t, or if puddles form, there may be an issue with the slope or drainage. To test the waterproofing, place plastic bags filled with sand over the drains, then fill the room with water and let it sit for 24 to 48 hours. If no leaks appear downstairs, the waterproofing is considered satisfactory.
Ventilation
If the bathroom has a window, make sure it’s fitted with a security mesh. If there’s no window, a vent should be installed under the ceiling. If it’s built into the ceiling, check that it’s functional and test its airflow. Also, inspect the toilet vent for any leftover construction debris that might block the system.
Plumbing and Electrical Systems
Check the hot and cold water pipes to ensure they’re functioning properly, especially when adjusting the temperature. Verify that the electrical outlets are working correctly and are placed at a safe height. Since bathrooms are prone to moisture, the wiring must be well-protected, and all sockets should have waterproof covers. Open every faucet and valve, and use dry hands to check the connections for any signs of leakage.
Retail Loss Prevention,Pos Detail Tracing For Drugstore,Pos Detail Tracing For Grocery Store,Loss Prevention For Resturant
OP Retail (Suzhou) Technology Co., Ltd , https://www.opretailtech.com