![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
1. The product specifications are highly customizable, with thickness ranging from 8 to 50mm, width between 150 and 625mm, and lengths from 5 to 15 meters. This wide range of dimensions ensures that it can meet the diverse needs of different users. Unlike standard plates, this product is manufactured without cutting, allowing for direct welding and reducing material waste.
2. The surface finish is exceptionally smooth, achieved through a two-stage high-pressure water descaling process during production. This ensures a clean, uniform surface free from scale or impurities, making it ideal for applications where aesthetics and quality matter.
3. The edges of the product are perfectly vertical, with clear and defined corners. This is made possible by the two-way vertical rolling technique used in the finishing stage, which guarantees precise edge quality and structural integrity. The result is a product with sharp, well-defined sides and excellent edge appearance.
4. The dimensional accuracy of the product is outstanding. It meets a three-point difference standard, with level differences that exceed those of conventional steel plates. The continuous rolling process combined with automatic loop control ensures consistent quality, preventing any pulling or stretching during production. The product maintains straightness and a good plate shape, with high precision in length due to cold shear cutting. Parameters such as the bending curve and tolerance range are all superior to standard steel plates, ensuring reliable performance in various applications.
5. The material used in this product adheres to national standards and is equivalent to standard steel plates. The technical specifications follow the YB/T4212-2010 standard, with grades Q345B and Q235B corresponding to GB/T1591-94 and GB/T700-88 respectively. This ensures that the product meets rigorous quality requirements and is suitable for a wide range of industrial uses.
Sealand is a trustworthy manufacturer of Microbend Mass Flow Meter, Microbend Mass Flowmeter, Microbend Coriolis Mass Flow Meter, Microbend Coriolis Mass Flowmeter.
Site Selection for Mass Flow Meter Installation
a) Sensor stays away from mechanical vibration source, for example, pump. Use flexible pipe to connect meter with pipeline if inevitable. The housing of meter must be standalone, out of touch with any other device. There must be 3 times the size of sensor between 2 sensors if there are many flow meters on the same pipeline, to avoid resonance.
b) Do not install sensor on pipeline that easily expands with hot and contracts with cold, especially near expansion joint, which leads to a worse stability.
c) Sensor stays away from industrial electromagnetic field, such as large generator and transformer, better 5m at least. Such device influences the performance of drive coil and pickoffs. Make sure magnetic field intensity less than 400A/m.
d) Sensor shall be installed on lower pipeline, to be easily full of fluid.
e) Make sure Ex-mark meet application requirements if in hazardous area.
f) Build a sunshade if the meter is under direct solar radiation. g) Keep the meter from corrosive liquid.
Microbend Mass Flow Meter, Microbend Mass Flowmeter, Microbend Coriolis Mass Flow Meter, Microbend Coriolis Mass Flowmeter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com