Overview of compressor load analysis for chiller maintenance

Compressor load analysis of chiller maintenance technology. During the chiller maintenance process, we will find that in the cryogenic equipment of the screw chiller, the compressor load phenomenon will occur, which is often encountered in the maintenance of chiller products. The problem is the embodiment of the chiller maintenance information. The company has many years of industry experience in this aspect of maintenance. Now let's analyze it and introduce it to the equipment. Analysis of the cause of the load problem to 75%.
First, the cause of compressor load analysis of chiller maintenance 1:
When the solenoid valve SV3 is activated by the temperature controller, the SV1 is turned off by the power failure, and the high pressure oil coming out of the fuel tank flows into the piston cylinder, pushing the piston to the right to move to the right when moving to 50% or 66% due to the high pressure oil The oil discharge hole is returned to the suction port through the SV3, so the piston stops moving at this position, and the compression is maintained at a 50% load state. Talk about the experience of chiller product maintenance.

The problem of 50% to 75% load in the screw chiller is as described above. It is a very common problem for the company to have such problems during the chiller maintenance process, so we need to be in the chiller. Good inspection of the equipment before maintenance, which is conducive to the good operation of the equipment operation and maintenance. Second, the compressor load analysis of chiller maintenance 2:
When the solenoid valve SV2 is activated, the electromagnetic SV3 is turned off by the power failure, and the high oil pressure pushes the piston to continue to move to the left. When moving to 75%, since the high pressure oil is returned from the oil discharge hole through the SV2 to the suction port, the piston is at this position. The operation was stopped and the compressor was kept at 75%. When it appears, we need to test the device. Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

Our Polyamide Net widely used for Cylinder Mould to produce different paper, you can also called Polyamide net as Nylon or PA net, Nylon Cover Cylinder Mould Covering and so on. The cylinder mould diameter have: 1.25m,1.5m.1.75m,2.0m and 2.5m. Polyamide mesh range from 10mesh to 100mesh.

Cylinder Covers

Cylinder Mould Wire, Polyamide Net, Nylon Cover, Cylinder Mould Covering, Wire Mesh Mould Covers, Mesh For Cylinder Mould Covers

HUATAO GROUP LTD , https://www.huataogroup.com