No one told me that the CNC cutting machine can be maintained like this.

Maintenance of CNC cutting machine The life of CNC cutting machine is not a specific value. It is well maintained and the order of operation is sure to be long. No matter what CNC cutting machine is produced by the factory, it has its own operating procedures. It is not only one of the important measures to ensure the safety of operators, but also an important measure to ensure equipment safety and product quality. The user must operate correctly according to the operating procedures. If the cutting machine is used for the first time or is not used for a long time, let it idle for a few minutes. Pay attention to the sequence of power-on and power-off and precautions during use (such as manual or These are especially important for beginners because they lack the appropriate operational training and are often prone to mistakes in this area. The use of CNC machine tools is more difficult than the use of ordinary machine tools, because CNC machine tools are typical electromechanical "target=_blank> mechatronics products, which involve a wide range of knowledge, that is, operators should have machine, electricity, liquid, gas With a wider range of professional knowledge, the quality requirements for operators are very high. With the advancement of science and technology, in general, the environment of CNC cutting machine has no harsh requirements, and can be placed in the same production as ordinary machine tools. Workshop, though, to say, because CNC cutting machines contain electronic components, they are most afraid of direct sunlight, and they are also afraid of moisture. These uniformities can cause electronic components to be corroded or cause short circuits between components, causing the cutter to not operate. Normally, these are generally taken care of when installing the cutting machine. For the user, the main thing is to pay attention to the protection of the surrounding environment. Wuhan Kai Shili reminds you that when it rains, pay attention not to let the rain drip onto the equipment. Do not let the equipment explode in the sun, etc. http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

We offer many different type Ignitor Insulator of Household Electrical Appliances, including dozen of standard design. Besides,  customized type can be done per customers' specification and drawing.

These spark plug insulators are commonly made of 95% alumina and shaped by hot pressing. Most of time, the surface finish of glazing is need in order to enhance the insulation breakdown.

We have been dealing with producing ignition ceramic electorde over than 12 years, it help us to make every batch to be dimensional, cosmetic with good consistency. 

We support prototyping to mass production. Whatever, it's a sample order or massive order, you are welcome to come with us.

Ignitor Insulator Of Household Electrical Appliances

Ignitor Insulator Of Household Electrical Appliances,Ignitor Insulator,Household Ignitor Insulator,Composite Insulator

Jinghui Industry Ltd. , https://www.ceramictek.com