Analysis and preventive measures for the main reasons why solar street lights are not bright

Hunan Solar Hunan Hot Water Project Changsha Solar Hunan Solar Street Light Changsha Hot Water Project Changsha Solar Street Light
[Hunan Solar Street Light] When configuring Hunan solar street light, first understand the local lighting conditions, road width and street light height and other related information, and then choose a street light with a height suitable for the lamp head, so that the power of the street light can be The number of rainy days in the area is compatible with the capacity of the battery, so that the street lights can be configured to avoid some phenomena such as the street lights are not bright.

The reason for the lack of light:
1. Due to the small power configuration of the solar panel, the battery is not fully charged, which makes the initial performance suitable. However, after several rainy weather, the light begins to darken, and it takes almost less than a year. Not bright, this reason is the most common.

2. The capacity of the battery is too small, or the setting of the solar street light controller does not meet the local demand, resulting in the number of days that the rainy days cannot reach. This situation is easy to occur in the case of a lot of rainy days. This situation will give The battery brings a certain burden, causing the battery to age prematurely.
3. If the power used by the led lamp head of Hunan solar street light is too large, the battery may be over-discharged and prematurely aged. If the power is too small, insufficient brightness will result in unnecessary waste of cost.

Precaution:

1. If it is an unprofessional company or a non-professional person to design and install, it may cause the above three phenomena to occur, resulting in a paralyzed street lamp system, which greatly reduces the service life of the street lamp.

2. When installing the Hunan solar street light, be sure to pay attention to these reasons in advance.



Contact phone address: Yuhua District, Changsha City, Yuhua Electromechanical "target=_blank> Electrical and Mechanical Market D District 7 Building No. 126 This article Source: Hunan Solar Street Light Hunan Solar http://China Hardware Business Network http://news.chinawj.com .cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

Hollow Welded Lever Handle The Hollow Welded Lever Handle is a special hollow handle. After stamping and welding processes. The hollow handle becomes a handle with the appearance of a cast handle. The weight of Stainless Steel Hollow Lever is heavier than the  the hollow tube Handles. Due to this reason, they are always used for the Commercial Door Hardware. Have a better budget to get the project done better.
Available to match: threaded and punching rosette & escutcheons; Also, plates can be matched according to detailed inquiries.
Insert head: Brass/Iron/Stainless steel/aluminum.
Finish available: Satin SS, Polished SS, PVD, Old Silver, Black, Powder Coated, Antique Brass, Cooper Brass etc.
Should you have any further demands, please feel free to contact us any time. And welcome for OEM products with detailed technical drawings.

Hollow Welded Lever Handle

Hollow Welded Lever Handle,Stainless Steel Hollow Levers,Hollow Welded Lever Handle on Rosette,Commercial Door Hardware

Greatwall Hardware International Limited , https://www.greatwall-hardware.com