Correct maintenance method for shower room

The shower room is a hot spot in the market in recent years. The whole shower room saves space and is easy to install, and the bathroom can be effectively dried and wet separated. In winter, it can also play a role in heat preservation. A series of advantages make the shower room a hot spot in the market in recent years.

Many consumers have questions: how to use the shower room after buying it, how to maintain it? For these problems, we understand and collect relevant answers from the Faenza product department and after-sales service department. The good quality of the product also requires later maintenance. Cleaning and maintenance are also very important for the shower room.

After a comfortable shower, pay great attention to daily cleaning and maintenance, so that the overall shower room has a longer service life. There are four main aspects of cleaning and maintenance shower room, maintenance of tempered glass, maintenance of aluminum alloy frame, maintenance of hardware accessories and maintenance of bathtub.

Maintenance of tempered glass: Do not hit or hit the glass surface with sharp objects to avoid damage; do not wipe the glass surface with water-like corrosive liquid; do not use rough materials to wipe the glass surface to avoid scratches. In the event of cracks or signs of damage, be sure to inform the after-sales service as soon as possible and give replacement and repair.

1. In order to avoid scratching the glass, it affects the visual beauty of the shower room. Generally, a soft dry cloth can be used for daily cleaning. 2. For the push-pull shower room, pay attention to the maintenance of the pulley. Avoid hitting the moving door with positive force and regularly clean the pulleys, slides, sliders and fill the lubricant on time. 3. For the aluminum alloy door frame, if there is stain on the surface of the aluminum material, it can be wiped with a neutral detergent. 4. For the floor of the shower room, do not hit or hit the surface with sharp objects to avoid damage.

Maintenance of aluminum frame:

First of all, it is necessary to prevent direct sunlight and explosion, otherwise the spray layer will be discolored; secondly, it cannot be wiped with corrosive liquid or material; third, the surface cannot be wiped with rough materials (including toothpaste); fourth, the surface cannot be sharpened with sharp objects. . If there is stain on the surface of the aluminum, use a neutral wash to clean the water and wipe it.

Maintenance of hardware accessories: push-pull shower door, currently has two ways: sliding block and sliding wheel. In the use of pulleys and slides, care should be taken to avoid the following collision with the movable door to avoid causing the movable door to fall off; pay attention to regularly clean the slide rails, pulleys, sliders, add lubricant (lubricating oil or lubricating wax); adjust the slider regularly. Adjust the screw to ensure the effective bearing and good sliding of the slider to the movable door.

Maintenance of the bathtub and chassis: Do not hit or impact the acrylic surface with sharp objects to avoid damage; do not wipe the acrylic surface with the corrosive liquid of the water, so as not to damage the surface gloss; do not wipe the acrylic surface with rough materials to avoid Scratches appear; use a soft, dry cloth when cleaning the walls and bottom of the shower enclosure. If there is slight dirt, please use a soft cloth or sponge to clean with a neutral detergent. When removing stubborn dirt, please remove it with alcohol.

Note: When using the bathroom-specific detergent, be sure to use it correctly according to the precautions stated on its container. Incorrect use can cause adverse effects on the human body and can easily cause some undesirable conditions in the product. Do not use the following items for cleaning: acidic, alkaline solvents, drugs (such as hydrochloric acid), acetone diluents and other solvents, decontamination powder, etc., otherwise it will have adverse effects on the human body, and will cause some adverse conditions.

Sampling Valve is used to obtain medium sample from pipeline or equipment, PVC Sampling Valve is made by PVC body and EPDM seals, screw end and coupling end for optional, most suitable for corrossive liquid, it is small size, durable, easy operate, maintance and cost low.

Ningbo RMI Plastic Co.,Ltd offer sampling valve with specification:                                                        

Size:DN15 (1/2")
Connection: fit coupling 20mm(1/2"), male thread 1/4"
Body Material: PVC
Sealing Material: EPDM
Design pressure:1.0Mpa(PN10 bar)

Sampling Valve

Sampling Valve,PVC Sampling Valve,Cock Valve PVC,Laboratory Valve

Ningbo RMI Plastic Co., Ltd. , https://www.rmiplast.com

Posted on