What are the advantages and disadvantages of vitrified tiles?

Tiles are essential decoration materials for home decoration. In recent years, vitrified tiles have become the mainstream of home decoration. It has the texture of natural stone, but also has the advantages of high brightness, high hardness, high wear resistance, low water absorption, less color difference, and diversified specifications and rich colors. The following Xiao Bian will introduce to you what are the advantages and disadvantages of vitrified tiles and vitrified tiles.

What is called tiles

Vitrified tiles are actually full tiles. Because of the difference in the manufacturing process, the densification degree is higher than that of a common floor tile, and its surface is smooth but does not require polishing, so there is no problem of polishing the air holes. Vitrified tiles are a kind of reinforced polished tiles that are fired from high temperatures. The texture is harder and more resistant than the polished tiles. The main difference between glass tiles and polished tiles is the water absorption.

The vitrified brick is a kind of bright brick that has been polished on the surface of the whole brick body and belongs to the whole body brick. Ceramics with a water absorption of less than 0.5% are called vitrified tiles. Polished tiles with a water absorption of less than 0.5% are also vitrified tiles (above 0.5% only polished tiles are not vitrified tiles), then the vitrified tiles The mirror-polished surface is a vitrified polished tile because its hardness is relatively high due to its low water absorption and it is not prone to scratches.

Vitrified tiles are made of quartz sand and mud fired at a certain proportion, then polished but do not need polishing, the surface is smooth and translucent like a glass mirror, is the hardest kind of all tiles, and its water absorption, edge Straightness, bending strength, acid and alkali resistance are superior to ordinary glazed tiles, polished tiles and general marble.

The advantages of glass tiles

1, colorful and soft, no significant color difference. Natural granites have large differences in color due to the time of diagenesis and the depth of the rock formation.

2, no harmful elements. Granite is a natural mineral that has been buried deep in the earth's crust for a long period of time. It has not been sintered at high temperatures and therefore contains trace amounts of radioactive elements. If it is exposed for a long time, it will be harmful to health.

3, the thickness is relatively thin, high flexural strength, lightweight bricks, building weight reduction. Natural granite has low strength and heavy weight, which increases the load of the building and brings a series of difficulties to the process of transportation and paving.

4, bending strength greater than 45mpa. The granite flexural strength is about 17-20mpa.

5, high-temperature sintering, complete porcelain produced a variety of crystals such as mullite, stable physical and chemical properties, corrosion resistance, strong stain resistance, long lasting as new. Granite due to the natural formation, the time of material, weathering, etc. are not the same, resulting in different density, strength, use two years after the gradual loss of luster, rough surface wear, difficult to clean, affect the appearance.

Disadvantages of vitrified tiles

The only disadvantage of vitrified tiles is that the surface is dirty. Porcelain tiles are exposed to the air after polishing, and dust, oil, and the like are easily infiltrated. This is an industry-recognized problem. It is a very useful measure to do a good job of antifouling treatment on the surface of vitrified tiles and block pores. In general, vitrified tiles are a good product and are a good choice for architectural design.

Editor's summary: What are the advantages and disadvantages of what are known as vitrified tiles and vitrified tiles? For more information, you can follow this site information.

Tiled Tile Tile Specification Acid Tile

Frp Duct Rodder (called cable duct rodder, snake duct rodder for electrical conduit) is commonly used for cable and wire laying in the conduit. With this excellent tool, you can easily thread the cable and wire through the conduit. It shows its strong high tensile strength and elasticity when doing the threading job. Diameter of FRP Duct Rodder from 4.5mm to 18mm with any length and colors.   

 

FRP Duct Rodder

Frp Duct Rodder,Fiberglass Duct Rodder,Frp Snake Duct Rodder,Electric Duct Rodder

Shandong Hiking International Commerce Group Co.,Ltd , https://www.hikingfrp.com