Analysis of the Causes of Spindle Sintering

Home>Bearing knowledge>Analysis of the causes of spindle tile sintering
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Analysis of the Causes of Spindle Sintering

Source: China Bearing Network Time: 2017-12-02

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
An agricultural vehicle is slowing down on the bumpy road in the country; the engine suddenly turns off; the engine is started again; it is not working. After viewing, the spindle is sintered; the reason for the analysis is:
First, the use of smooth oil is not the right engine is based on different seasons of demand to use different types of oil. Because the operator does not change the corresponding number of oil at any time; so that the oil can not satisfy the smooth demand of the engine and formed a problem. The oil is not properly stored and the quality does not meet the demand; it will also cause the engine to burn.
Second, the bearing space does not meet the demand of the bearing bush gap too. Gray wei wei recovery rate blame 鹕 鹕 鹕 峄蛉刍 峄蛉刍 嵬呒湎 嵬呒湎 嵬呒湎 嵬呒湎 孤 孤 孤 孤 孤 孤 孤 孤 孤 孤胪叻 (5) does not ruin the rulings of Jia 嵬吆 嵬吆.
Third, the oil pressure is too low, the oil pressure is too low; not only the bearing space is too large; sometimes due to the internal leakage of the oil pump is severe; the lack of smooth oil supply; the formation of engine burning tile.
4. Replace the new bearing bush without clearing the oil passage and the running-in test engine to replace the new bearing bush; carefully check the oil application level; remove the oil passage; after the change of the tile, it is necessary to run through the low speed.
5. Other reasons: Cooling water, diesel oil, and hydraulic oil enter the oil to cause it to change; the smooth function of the oil is reduced to form a burnt tile.
Recommend to friends comments close window

Bearing related knowledge
Classification of bearing clearance for bearing clearance: Rolling bearing angular contact ball bearing product characteristics and classification Hybrid ceramic bearing classification and application analysis How to select imported bearings and application precautions


This article links to http://
Please indicate the bearing network http://

Previous:FAFNIR, TORRINTON company bearing make up code next edition: the use of fine rolling bearings in electronic special equipment

Stainless Steel Utentials For Jail

Wc Pan Reducer,Rimless Wc Pan,Wc Pan Riser Plinth,Brush Wc Pan Plastic

Xinhe Stainless Steel Products Co., Ltd. Of Pengjiang District Jiangmen City , https://www.sinkhall.com

Posted on