![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
For the maintenance of fire-retardant fire-retardant clothing, here are a few precautions that Nantong Bao Jian summed up for your maintenance of fire-retardant fire-resistant clothing. I hope to help everyone:
First, fire-retardant and fireproof clothing must be completely dried before re-storage, it is best not to fold.
Second, if the surface of the fire-retardant fireproof clothing is not a very serious burn mark or abrasion, it can be repaired with an aluminum-plated spray gun. If the exterior of the fire retardant suit is damaged, replace the fire retardant suit.
Third, if the flame-retardant fire protective clothing has been in contact with chemicals, or found bubble phenomenon, you should clean the entire aluminum-plated surface. If there is oil or grease residue left on the fire retardant suit, use neutral soap for cleaning.
Fourth, if you want to remove the residual dirt on the flame retardant clothes, use tap water and neutral soap, if necessary, detergent, detergent only used in the contaminated site, be careful, because the detergent may damage the aluminum plating surface.
5. After each use, take a look at the condition of the flame-retardant clothing and focus on checking for wear.
More special protective clothing, preferred Nantong Bao Jian http://.
It is a construction product that is made by casting concrete in a reusable mold or "formwork", then curing it in a controlled environment, transporting it to the construction site and lifting it in place ("tilting upward "). Instead, the standard concrete is poured into the form of a specific location and cured on site. Recently, expanded polystyrene has been used as the core of prefabricated wall panels. It is lightweight and has better thermal insulation properties.
As Cast Concrete Formwork,Cast Formwork Construction,Concrete Cast Formwork,Concrete Wall Form Systems
Anshan Lijian Engineering Group Co. LTD , https://www.lijianformwork.com